Table of Contents
Advertisement
Replace the Disk Drive Backplane (FRU)
15.
Reconnect the ribbon data cable and power cable to the bottom of the disk
backplane board.
16.
To install the air divider:
Note -
mechanism can engage the motherboard-mounted switch, the divider must be installed
correctly.
a.
Gently rotate the air divider and cables from where you set it down in step 6
back to its proper position.
Ensure that all cables lay flat against the power supply side wall and do not cross over
each other. Do not allow the cables to interfere with the Fault Remind button mechanism
(button extension or light pipe).
b.
Align the two tabs on the divider with the two slots in the power supply side
wall.
c.
Push the tabs into the slots so that the air divider is flush with the power
supply side wall.
242
Oracle Server X5-4 Service Manual • December 2015
The air divider contains the Fault Remind button mechanism. To ensure that the
Advertisement
Table of Contents
Troubleshooting
