Power Off, Remote (Oracle Ilom Cli); Oracle Server X5-4 Service Manual • December - Oracle X5-4 Service Manual

Power Off, Remote (Oracle ILOM CLI)

1. Press and hold the Power button for at least five seconds until full power is off
and the server enters standby power mode.
2. Verify that the full power is off, and that the OK indicator on the front panel
blinks, indicating that the server is in standby power mode.
"Power Subsystem" on page 28
See Also ■
Power Off, Remote (Oracle ILOM CLI)
You can use the Oracle ILOM SP command-line interface (CLI) to remotely power off the
server to standby power mode.
1. Open an SSH session and log in to the Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
where ipadress is the IP address of the server SP.
For more information, refer to the Oracle X5 Series Servers Administration Guide at
www.oracle.com/goto/x86AdminDiag/docs.
The Oracle ILOM CLI prompt appears:
->
104 Oracle Server X5-4 Service Manual • December 2015
ipadress
http://