Troubleshooting The Service Processor Connection; Reset The Service Processor Using Oracle Ilom - Oracle Sun Server X4-4 Installation Manual

Troubleshooting the Service Processor Connection

This section addresses two issues that might occur regarding the Oracle ILOM service
processor (SP):
The Oracle ILOM SP is hung and needs to be reset.
■
As the system administrator, you have forgotten the root account password and you need to
■
recover it.
For instructions on how to handle each of these problems, see the following sections:
"Reset the Service Processor Using Oracle ILOM" on page 67
■
"Resetting the Service Processor Using the SP Reset Switch" on page 68
■
"Recover Root Account Password" on page 68
■

Reset the Service Processor Using Oracle ILOM

The Host Control and Reset (r) role is required to reset a service processor.
Before You Begin
1. Log in to the Oracle ILOM using the relevant method in
Using a Local Serial Connection" on page 55
a Remote Ethernet Connection" on page
2. Reset the Oracle ILOM service processor (SP) using one of the following
methods:
From the Oracle ILOM CLI, enter the command:
■
reset /SP
From the Oracle ILOM web interface, click Administration > Maintenance >
■
Reset SP.
Note -
log in again to continue working in Oracle ILOM.
Resetting the Oracle ILOM SP disconnects your current Oracle ILOM session. You must
Troubleshooting the Service Processor Connection
"Log In to Oracle ILOM
or "Log In to Oracle ILOM Using
56.
Connecting to Oracle ILOM 67