Oracle X5-4 Service Manual page 95

Remove, replace, or install cold-serviceable components
■
Remove, replace, or install internal components
■
Use the motherboard processor and DIMM fault remind circuitry
■
Important: Review the server Product Notes document before performing removal and
Before You Begin ■
installation procedures.
For troubleshooting information, see
■
Faults" on page
1. To power down the server and activate the front panel Locator indicator, do the
following:
a. Log in to the Oracle ILOM web interface.
Type the server SP IP address into a web browser and log in as a user with root or
administrator privileges. For more information, refer to the Oracle X5 Series Servers
Administration Guide at http://www.oracle.com/goto/x86AdminDiag/docs.
b. In the Actions section of the Summary screen, click the Power State Turn Off
button.
This action powers off the server to standby power mode. For more power off options, see
"Powering Off the server" on page
c. In the Actions section of the Summary screen, click the Locator Indicator
Turn On button.
This action activates the Locator indicator on the server front panel. For more Locator
indicator management options, see
"Troubleshooting Server Hardware Component
37.
101.
"Managing the Locator Indicator" on page
Prepare the Server for Cold Service
107.
Preparing to Service the Server 95