Power Off The Server Using The Server Os; Power Off, Graceful (Power Button) - Oracle X5-4 Service Manual

Power Off the Server Using the Server OS

"Power Off, Immediate (Power Button)" on page 103
■
"Power Off, Remote (Oracle ILOM CLI)" on page 104
■
"Power Off, Remote (Oracle ILOM Web Interface)" on page 105
■
"Remove Power" on page 106
■
Power Off the Server Using the Server OS
If the server OS is running, you can use the OS shutdown procedure to power off the server to
standby power mode. The OS shutdown procedure provides a graceful shutdown of the server.
To power off the server, use the OS-specific shutdown procedure.
"Power Subsystem" on page 28
See Also ■

Power Off, Graceful (Power Button)

Note -
Powering off the server by pressing the front panel Power button causes operating systems with
Advanced Configuration and Power Interface (ACPI) to perform an orderly shutdown of the
OS. Non-ACPI enabled operating systems might ignore this event and not shut down the host.
If your OS ignores this event, shut down the server using the server OS or Oracle ILOM.
Use this procedure to perform a graceful power off and place the server in standby power mode.
1. To power off the server gracefully, press and immediately release the front panel
Power button.
102 Oracle Server X5-4 Service Manual • December 2015
This procedure is performed locally and requires access to the server front panel.