Installing Blackmagic Atem Software On Mac Os X - Blackmagicdesign ATEM Television Studio Installation And Operation Manual

Getting Started
11
Follow install prompts.

Installing Blackmagic ATEM Software on Mac OS X

Before installing any software you will need administrator privileges.
Step 1. Ensure you have the very latest driver. Visit www.blackmagic-design.com/support
Step 2. Open the "Blackmagic ATEM Switchers" folder from the disc or downloaded disk image and
launch the "Blackmagic ATEM Switchers Installer".
Step 3. Click Continue, Agree and Install buttons and the software will be installed on your system.
Step 4. Now restart your computer to enable the new software drivers.
Plugins and Applications that are Installed
The ATEM Switchers software installs the following components which are used by ATEM Switchers:
‚ ATEM Software Control
‚ ATEM Setup Utility
‚ Blackmagic Desktop Video drivers
‚ Blackmagic Media Express
The ATEM Switchers software also installs additional Blackmagic Desktop Video components which are
used by other Blackmagic Design capture products when installed on the same computer:
On Mac OS X, all the files needed to run your ATEM switcher will be installed into a folder called Blackmagic
ATEM Switchers in the Applications folder.
In this Blackmagic ATEM Switchers folder, you will see ATEM Software Control, which is the software control
panel for your switcher, and also allows loading graphics into the switcher media pool and changing settings.
The ATEM Setup Utility allows you to change the switcher IP address, or update the switcher and panel
software via USB. Also included in this folder is this instruction manual and some example graphics. Use the
example graphics to explore the internal media pool and keying functionality.
In the Applications folder, you will see Blackmagic Media Express which allows you to capture the Program
Output of ATEM Television Studio to H.264 files.