Cli Command Groups; Table 40: Command Group Index - Edge-Core ECS3510-26P Management Manual

| Using the Command Line Interface
C 18
HAPTER

CLI Command Groups

CLI C G
OMMAND ROUPS
The system commands can be broken down into the functional groups
shown below
.

Table 40: Command Group Index

Command Group Description
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, the system clock, and switch clustering
Simple Network Activates authentication failure traps; configures
Management Protocol community access strings, and trap receivers
Remote Monitoring Supports statistics, history, alarm and event groups
User Authentication Configures user names and passwords, logon access
using local or remote authentication, management
access through the web server, Telnet server and Secure
Shell; as well as port security, IEEE 802.1X port access
control, and restricted access based on specified IP
addresses
General Security Segregates traffic for clients attached to common data
Measures ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address or DSCP traffic class), or
non-IP frames (based on MAC address or Ethernet type)
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
Power over Ethernet Configures power output for connected devices
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
Rate Limit Controls the maximum rate for traffic transmitted or
received on a port
Automatic Traffic Control Configures bounding thresholds for broadcast and
multicast storms which can be used to trigger configured
rate limits or to shut down a port
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
Spanning Tree Configures Spanning Tree settings for the switch
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, protocol VLANs, voice VLANs, and QinQ tunneling
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for each
priority queue, also sets priority for DSCP
– 514 –
Page
517
525
581
601
609
663
711
729
749
777
761
771
773
789
795
821
857