Figure 136: Configuring Port Settings For A Voice Vlan - Edge-Core ECS3510-26P Management Manual

| VoIP Traffic Configuration
C 12
HAPTER
Configuring VoIP Traffic Ports
be removed from voice VLAN when VoIP traffic is no longer received on
the port. Alternatively, if you clear the MAC address table manually,
then the switch will also start counting down the Remaining Age.
W I
EB NTERFACE
To configure VoIP traffic settings for a port:
Click Traffic, VoIP.
1.
Select Configure Interface from the Step list.
2.
Configure any required changes to the VoIP settings each port.
3.
Click Apply.
4.

Figure 136: Configuring Port Settings for a Voice VLAN

– 274 –