Snmp-Server Notify-Filter - Edge-Core ECS3510-26P Management Manual

26-port fast ethernet layer 2 switch

Hide thumbs Also See for ECS3510-26P:

Table of Contents

Global Configuration

Notification logging is enabled by default, but will not start recording

information until a logging profile specified by the

notify-filter

Disabling logging with this command does not delete the entries stored

in the notification log.

This example enables the notification logs A1 and A2.

Console(config)#nlm A1

Console(config)#nlm A2

Console(config)#

This command creates an SNMP notification log. Use the no form to

remove this log.

notify-filter

[no] snmp-server notify-filter profile-name remote ip-address

The notification log is stored locally. It is not sent to a remote

device. This remote host parameter is only required to complete

mandatory fields in the SNMP Notification MIB.

Global Configuration

Systems that support SNMP often need a mechanism for recording

Notification information as a hedge against lost notifications, whether

those are Traps or Informs that exceed retransmission limits. The

Notification Log MIB (NLM, RFC 3014) provides an infrastructure in

which information from other MIBs may be logged.

command is enabled by the nlm command.

profile-name - Notification log profile name. (Range: 1-32

ip-address - The Internet address of a remote device. The specified

target host must already have been configured using the

| SNMP Commands

Notification Log Commands

Show Quick Links

Table of Contents