Configuring Telephony Oui - Edge-Core ECS3510-26P Management Manual

C T
ONFIGURING ELEPHONY
Figure 133: Configuring a Voice VLAN
OUI
VoIP devices attached to the switch can be identified by the vendor's
Organizational Unique Identifier (OUI) in the source MAC address of
received packets. OUI numbers are assigned to vendors and form the first
three octets of device MAC addresses. The MAC OUI numbers for VoIP
equipment can be configured on the switch so that traffic from these
devices is recognized as VoIP. Use the Traffic > VoIP (Configure OUI) page
to configure this feature.
CLI R
EFERENCES
"Configuring Voice VLANs" on page 849
◆
P
ARAMETERS
These parameters are displayed:
Telephony OUI – Specifies a MAC address range to add to the list.
◆
Enter the MAC address in format 01-23-45-67-89-AB.
Mask – Identifies a range of MAC addresses. Setting a mask of FF-FF-
◆
FF-00-00-00 identifies all devices with the same OUI (the first three
octets). Other masks restrict the MAC address range. Setting FF-FF-FF-
FF-FF-FF specifies a single MAC address. (Default: FF-FF-FF-00-00-00)
Description – User-defined text that identifies the VoIP devices.
◆
W I
EB NTERFACE
To configure MAC OUI numbers for VoIP equipment:
Click Traffic, VoIP.
1.
Select Configure OUI from the Step list.
2.
Select Add from the Action list.
3.
Enter a MAC address that specifies the OUI for VoIP devices in the
4.
network.
Select a mask from the pull-down list to define a MAC address range.
5.
– 271 –
| VoIP Traffic Configuration
C 12
HAPTER

Configuring Telephony OUI