Configuring Port Supplicant Settings For 802.1X - Edge-Core ECS3510-26P Management Manual

| Security Measures
C 13
HAPTER
Configuring 802.1X Port Authentication
Figure 190: Configuring Interface Settings for 802.1X Port Authenticator
Use the Security > Port Authentication (Configure Interface – Supplicant)
C P
ONFIGURING ORT
page to configure 802.1X port settings for supplicant requests issued from
S S
UPPLICANT ETTINGS
a port to an authenticator on another device. When 802.1X is enabled and
802.1X
FOR
the control mode is set to Force-Authorized (see "Configuring Port
Authenticator Settings for 802.1X" on page 345), you need to configure
the parameters for the client supplicant process if the client must be
authenticated through another device in the network.
CLI R
EFERENCES
◆ "802.1X Port Authentication" on page 645
– 349 –