Password-Thresh - Edge-Core ECS3510-26P Management Manual

26-port fast ethernet layer 2 switch

Hide thumbs Also See for ECS3510-26P:

Table of Contents

Console(config-line)#password 0 secret

Console(config-line)#

password-thresh (549)

This command sets the password intrusion threshold which limits the

password-thresh

number of failed logon attempts. Use the no form to remove the threshold

The default value is three attempts.

Line Configuration

When the logon attempt threshold is reached, the system interface

becomes silent for a specified amount of time before allowing the next

logon attempt. (Use the

this threshold is reached for Telnet, the Telnet logon interface shuts down.

When a connection is started on a line with password protection, the

system prompts for the password. If you enter the correct password,

the system shows a prompt. You can use the

command to set the number of times a user can enter an incorrect

password before the system terminates the line connection and returns

the terminal to the idle state.

The encrypted password is required for compatibility with legacy

password settings (i.e., plain text or encrypted) when reading the

configuration file during system bootup or when downloading the

configuration file from a TFTP server. There is no need for you to

manually configure encrypted passwords.

password-thresh [threshold]

no password-thresh

threshold - The number of allowed password attempts.

(Range: 1-120; 0: no threshold)

| System Management Commands

password-thresh

command to set this interval.) When

Show Quick Links

Table of Contents