Table 30: Remote Port Auto-Negotiation Advertised Capability - Edge-Core ECS3510-26P Management Manual

Port Details – 802.3 Extension Port Information
Remote Port Auto-Neg Supported – Shows whether the given port
◆
(associated with remote system) supports auto-negotiation.
Remote Port Auto-Neg Adv-Capability – The value (bitmap) of the
◆
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636)
which is associated with a port on the remote system.

Table 30: Remote Port Auto-Negotiation Advertised Capability

Bit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Remote Port Auto-Neg Status – Shows whether port auto-
◆
negotiation is enabled on a port associated with the remote system.
◆ Remote Port MAU Type – An integer value that indicates the
operational MAU type of the sending device. This object contains the
integer value derived from the list position of the corresponding
dot3MauType as listed in IETF RFC 3636 and is equal to the last number
in the respective dot3MauType OID.
Port Details – 802.3 Extension Power Information
◆ Remote Power Class – The port Class of the given port associated
with the remote system (PSE – Power Sourcing Equipment or PD –
Powered Device).
Remote Power MDI Status – Shows whether MDI power is enabled
◆
on the given port associated with the remote system.
– 389 –
| Basic Administration Protocols
C 14
HAPTER
Capability
other or unknown
10BASE-T half duplex mode
10BASE-T full duplex mode
100BASE-T4
100BASE-TX half duplex mode
100BASE-TX full duplex mode
100BASE-T2 half duplex mode
100BASE-T2 full duplex mode
PAUSE for full-duplex links
Asymmetric PAUSE for full-duplex links
Symmetric PAUSE for full-duplex links
Asymmetric and Symmetric PAUSE for full-duplex links
1000BASE-X, -LX, -SX, -CX half duplex mode
1000BASE-X, -LX, -SX, -CX full duplex mode
1000BASE-T half duplex mode
1000BASE-T full duplex mode
Link Layer Discovery Protocol