Port Authentication; Table 75: 802.1X Port Authentication Commands - Edge-Core ECS3510-26P Management Manual

802.1X P A
ORT UTHENTICATION
The switch supports IEEE 802.1X (dot1x) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).

Table 75: 802.1X Port Authentication Commands

Command
General Commands
dot1x default
dot1x eapol-pass-through
dot1x system-auth-control
Authenticator Commands
dot1x intrusion-action
dot1x max-req
dot1x operation-mode
dot1x port-control
dot1x re-authentication
dot1x timeout quiet-period
dot1x timeout
re-authperiod
dot1x timeout supp-timeout
dot1x timeout tx-period
dot1x re-authenticate
Supplicant Commands
dot1x identity profile
dot1x max-start
dot1x pae supplicant
dot1x timeout auth-period
dot1x timeout held-period
– 645 –
C 23
HAPTER
Function
Resets all dot1x parameters to their default values
Passes EAPOL frames to all ports in STP forwarding
state when dot1x is globally disabled
Enables dot1x globally on the switch.
Sets the port response to intrusion when
authentication fails
Sets the maximum number of times that the switch
retransmits an EAP request/identity packet to the
client before it times out the authentication session
Allows single or multiple hosts on an dot1x port
Sets dot1x mode for a port interface
Enables re-authentication for all ports
Sets the time that a switch port waits after the Max
Request Count has been exceeded before attempting
to acquire a new client
Sets the time period after which a connected client
must be re-authenticated
Sets the interval for a supplicant to respond
Sets the time period during an authentication session
that the switch waits before re-transmitting an EAP
packet
Forces re-authentication on specific ports
Configures dot1x supplicant user name and password GC
Sets the maximum number of times that a port
supplicant will send an EAP start frame to the client
Enables dot1x supplicant mode on an interface
Sets the time that a supplicant port waits for a
response from the authenticator
Sets the time a port waits after the maximum start
count has been exceeded before attempting to find
another authenticator
| Authentication Commands
802.1X Port Authentication
Mode
GC
GC
GC
IC
IC
IC
IC
IC
IC
IC
IC
IC
PE
IC
IC
IC
IC