Setting The Sntp Polling Interval; Figure 12: Manually Setting The System Clock - Edge-Core ECS3510-26P Management Manual

| Basic Management Tasks
C 4
HAPTER
Setting the System Clock
S SNTP
ETTING THE
P I
OLLING NTERVAL
Day – Sets the day of the month. (Range: 1-31)
◆
Year – Sets the year. (Range: 1970-2037)
◆
W I
EB NTERFACE
To manually set the system clock:
Click System, then Time.
1.
Select Configure General from the Step list.
2.
Select Manually from the Maintain Type list.
3.
Enter the time and date in the appropriate fields.
4.
Click Apply
5.

Figure 12: Manually Setting the System Clock

Use the System > Time (Configure General - SNTP) page to set the polling
interval at which the switch will query the specified time servers.
CLI R
EFERENCES
"Time" on page 565
◆
P
ARAMETERS
The following parameters are displayed:
Current Time – Shows the current time set on the switch.
◆
SNTP Polling Interval – Sets the interval between sending requests
◆
for a time update from a time server. (Range: 16-16384 seconds;
Default: 16 seconds)
W I
EB NTERFACE
To set the polling interval for SNTP:
Click System, then Time.
1.
Select Configure General from the Action list.
2.
– 112 –