Displaying Global Settings For Sta - Edge-Core ECS3510-26P Management Manual

| Spanning Tree Algorithm
C 8
HAPTER

Displaying Global Settings for STA

D G
ISPLAYING LOBAL
Figure 96: Configuring Global Settings for STA (MSTP)
S STA
ETTINGS FOR
Use the Spanning Tree > STA (Configure Global - Show Information) page
to display a summary of the current bridge STA information that applies to
the entire switch.
CLI R
EFERENCES
"show spanning-tree" on page 818
◆
"show spanning-tree mst configuration" on page 820
◆
P
ARAMETERS
The parameters displayed are described in the preceding section, except
for the following items:
Bridge ID – A unique identifier for this bridge, consisting of the bridge
◆
priority, the MST Instance ID 0 for the Common Spanning Tree when
spanning tree type is set to MSTP, and MAC address (where the address
is taken from the switch system).
Designated Root – The priority and MAC address of the device in the
◆
Spanning Tree that this switch has accepted as the root device.
Root Port – The number of the port on this switch that is closest to the
◆
root. This switch communicates with the root device through this port.
– 212 –