Ip Ssh Timeout - Edge-Core ECS3510-26P Management Manual

| Authentication Commands
C 23
HAPTER
Secure Shell

ip ssh timeout

delete public-key
This command configures the timeout for the SSH server. Use the no form
to restore the default setting.
S
YNTAX
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
D S
EFAULT ETTING
10 seconds
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
The timeout specifies the interval the switch will wait for a response from
the client during the SSH negotiation phase. Once an SSH session has been
established, the timeout for user input is controlled by the
command for vty sessions.
E
XAMPLE
Console(config)#ip ssh timeout 60
Console(config)#
R C
ELATED OMMANDS
exec-timeout (546)
show ip ssh (643)
This command deletes the specified user's public key.
S
YNTAX
delete public-key username [dsa | rsa]
username – Name of an SSH user. (Range: 1-8 characters)
dsa – DSA public key type.
rsa – RSA public key type.
D S
EFAULT ETTING
Deletes both the DSA and RSA key.
C M
OMMAND ODE
Privileged Exec
– 640 –
exec-timeout