Figure 245: Configuring An Rmon History Sample - Edge-Core ECS3510-26P Management Manual

| Basic Administration Protocols
C 14
HAPTER
Remote Monitoring
P
ARAMETERS
These parameters are displayed:
Port – The port number on the switch.
◆
Index - Index to this entry. (Range: 1-65535)
◆
Interval - The polling interval. (Range: 1-3600 seconds; Default: 1800
◆
seconds)
Buckets - The number of buckets requested for this entry.
◆
(Range: 1-65536; Default: 8)
The number of buckets granted are displayed on the Show page.
Owner - Name of the person who created this entry. (Range: 1-127
◆
characters)
W I
EB NTERFACE
To periodically sample statistics on a port:
Click Administration, RMON.
1.
Select Configure Interface from the Step list.
2.
Select Add from the Action list.
3.
Click History.
4.
Select a port from the list as the data source.
5.
Enter an index number, the sampling interval, the number of buckets to
6.
use, and the name of the owner for this entry.
Click Apply
7.

Figure 245: Configuring an RMON History Sample

– 426 –