Configuring Interface Settings For Arp Inspection - Edge-Core ECS3510-26P Management Manual

By default, all untrusted ports are subject to ARP packet rate limiting,
and all trusted ports are exempt from ARP packet rate limiting.
Packets arriving on trusted interfaces bypass all ARP Inspection and
ARP Inspection Validation checks and will always be forwarded, while
those arriving on untrusted interfaces are subject to all configured ARP
inspection tests.
Packet Rate Limit – Sets the maximum number of ARP packets that
◆
can be processed by CPU per second on trusted or untrusted ports.
(Range: 0-2048; Default: 15)
Setting the rate limit to "0" means that there is no restriction on the
number of ARP packets that can be processed by the CPU.
The switch will drop all ARP packets received on a port which exceeds
the configured ARP-packets-per-second rate limit.
W I
EB NTERFACE
To configure interface settings for ARP Inspection:
Click Security, ARP Inspection.
1.
Select Configure Interface from the Step list.
2.
Specify any untrusted ports which require ARP inspection, and adjust
3.
the packet inspection rate.
Click Apply.
4.
Figure 181: Configuring Interface Settings for ARP Inspection
– 335 –
| Security Measures
C 13
HAPTER
ARP Inspection