Edge-Core ECS3510-26P Management Manual page 658

| Authentication Commands
C 23
HAPTER
802.1X Port Authentication
Supplicant Parameters – Shows the supplicant user name used when
◆
the switch responds to an MD5 challenge from an authenticator
(page 654).
802.1X Port Summary – Displays the port access control parameters
◆
for each interface that has enabled 802.1X, including the following
items:
Type – Administrative state for port access control (Enabled,
■
Authenticator, or Supplicant).
Operation Mode–Allows single or multiple hosts
■
Control Mode – Dot1x port control mode
■
Authorized– Authorization status (yes or n/a - not authorized).
■
802.1X Port Details – Displays the port access control parameters for
◆
each interface, including the following items:
Reauthentication – Periodic re-authentication
■
Reauth Period – Time after which a connected client must be re-
■
authenticated (page
Quiet Period – Time a port waits after Max Request Count is
■
exceeded before attempting to acquire a new client
TX Period – Time a port waits during authentication session before
■
re-transmitting EAP packet
Supplicant Timeout – Supplicant timeout.
■
Server Timeout – Server timeout. A RADIUS server must be set
■
before the correct operational value of 10 seconds will be displayed
in this field.
Reauth Max Retries – Maximum number of reauthentication
■
attempts.
Max Request – Maximum number of times a port will retransmit an
■
EAP request/identity packet to the client before it times out the
authentication session
Operation Mode– Shows if single or multiple hosts (clients) can
■
connect to an 802.1X-authorized port.
Port Control–Shows the dot1x mode on a port as auto, force-
■
authorized, or force-unauthorized
Intrusion Action– Shows the port response to intrusion when
■
authentication fails
Supplicant– MAC address of authorized client.
■
Authenticator PAE State Machine
◆
State – Current state (including initialize, disconnected, connecting,
■
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
Reauth Count– Number of times connecting state is re-entered.
■
Current Identifier– The integer (0-255) used by the Authenticator to
■
identify the current authentication session.
◆ Backend State Machine
State – Current state (including request, response, success, fail,
■
timeout, idle, initialize).
– 658 –
(page
651).
(page 652).
(page 648).
(page 650).
(page 647).
(page 649).
650).
(page 650).
(page 651).