Cli Command Groups; Table 44: Command Group Index - Edge-Core ECS3510-28T Management Manual

| Using the Command Line Interface
C 18
HAPTER

CLI Command Groups

CLI C G
OMMAND ROUPS
Table 43: Keystroke Commands (Continued)
Keystroke Function
Ctrl-K Deletes all characters from the cursor to the end of the line.
Ctrl-L Repeats current command line on a new line.
Ctrl-N Enters the next command line in the history buffer.
Ctrl-P Enters the last command.
Ctrl-R Repeats current command line on a new line.
Ctrl-U Deletes from the cursor to the beginning of the line.
Ctrl-W Deletes the last word typed.
Esc-B Moves the cursor back one word.
Esc-D Deletes from the cursor to the end of the word.
Esc-F Moves the cursor forward one word.
Delete key or Erases a mistake when entering a command.
backspace key
The system commands can be broken down into the functional groups
shown below
.

Table 44: Command Group Index

Command Group Description
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, the system clock, and switch clustering
Simple Network Activates authentication failure traps; configures
Management Protocol community access strings, and trap receivers
Remote Monitoring Supports statistics, history, alarm and event groups
User Authentication Configures user names and passwords, command
privilege levels, logon access using local or remote
authentication, management access through the web
server, Telnet server and Secure Shell; as well as port
security, IEEE 802.1X port access control, restricted
access based on specified IP addresses, and PPPoE
Intermediate Agent
General Security Segregates traffic for clients attached to common data
Measures ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, or
next header), or non-IP frames (based on MAC address
or Ethernet type)
– 686 –
Page
689
697
771
793
801
865
943