Lldp Basic-Tlv System-Name - Edge-Core ECS3510-26P Management Manual

| LLDP Commands
C 37
HAPTER
lldp basic-tlv
system-name
lldp dot1-tlv
proto-ident
This command configures an LLDP-enabled port to advertise the system
name. Use the no form to disable this feature.
S
YNTAX
[no] lldp basic-tlv system-name
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
The system name is taken from the sysName object in RFC 3418, which
contains the system's administratively assigned name, and is in turn based
on the hostname command.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-name
Console(config-if)#
This command configures an LLDP-enabled port to advertise the supported
protocols. Use the no form to disable this feature.
S
YNTAX
[no] lldp
dot1-tlv proto-ident
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
This option advertises the protocols that are accessible through this
interface.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-ident
Console(config-if)#
– 930 –