Table 20: Https System Support - Edge-Core ECS3510-26P Management Manual

The client and server establish a secure encrypted connection.
◆
A padlock icon should appear in the status bar for Internet Explorer 6.x
or above, or Mozilla Firefox 4.x or above.
The following web browsers and operating systems currently support
◆
HTTPS:

Table 20: HTTPS System Support

Web Browser
Internet Explorer 6.x or later
Mozilla Firefox 6.x or later
◆ To specify a secure-site certificate, see
site Certificate" on page
Users are automatically logged off of the HTTP server or HTTPS
N :
OTE
server if no input is detected for 600 seconds.
Connection to the web interface is not supported for HTTPS using an
N :
OTE
IPv6 link local address.
P
ARAMETERS
These parameters are displayed:
◆ HTTPS Status – Allows you to enable/disable the HTTPS server feature
on the switch. (Default: Disabled)
HTTPS Port – Specifies the TCP port number used for HTTPS
◆
connection to the switch's web interface. (Default: Port 443)
W I
EB NTERFACE
To configure HTTPS:
Click Security, HTTPS.
1.
Select Configure Global from the Step list.
2.
Enable HTTPS and specify the port number if required.
3.
Click Apply.
4.
– 307 –
C
HAPTER
Operating System
Windows 98,Windows NT (with service pack 6a),
Windows 2000, XP, Vista, 7, 8
Windows 2000, XP, 7, 8, or Linux
"Replacing the Default Secure-
308.
| Security Measures
13
Configuring HTTPS