Absolute - Edge-Core ECS3510-26P Management Manual

This command sets the time range for the execution of a command. Use

absolute

the no form to remove a previously specified time.
S
YNTAX
absolute start hour minute day month year
[end hour minutes day month year]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2009-2109)
D S
EFAULT ETTING
None
C M
OMMAND
Time Range Configuration
C U
OMMAND SAGE
If a time range is already configured, you must use the no form of this
◆
command to remove the current entry prior to configuring a new time
range.
◆ If both an absolute rule and one or more periodic rules are configured
for the same time range (i.e., named entry), that entry will only take
effect if the current time is within the absolute time range and one of
the periodic time ranges.
E
XAMPLE
This example configures the time for the single occurrence of an event.
Console(config)#time-range r&d
Console(config-time-range)#absolute start 1 1 1 april 2009 end 2 1 1 april
2009
Console(config-time-range)#
C
HAPTER
ODE
– 573 –
| System Management Commands
20
Time Range