Figure 66: Configuring Global Status Of Gvrp - Edge-Core ECS3510-26P Management Manual

Show Dynamic VLAN – Show VLAN
VLAN ID – Identifier of a VLAN this switch has joined through GVRP.
VLAN Name – Name of a VLAN this switch has joined through GVRP.
Status – Indicates if this VLAN is currently operational.
(Display Values: Enabled, Disabled)
Show Dynamic VLAN – Show VLAN Member
VLAN – Identifier of a VLAN this switch has joined through GVRP.
◆
Interface – Displays a list of ports or trunks which have joined the
◆
selected VLAN through GVRP.
W I
EB NTERFACE
To configure GVRP on the switch:
Click VLAN, Dynamic.
1.
Select Configure General from the Step list.
2.
Enable or disable GVRP.
3.
Click Apply.
4.

Figure 66: Configuring Global Status of GVRP

To configure GVRP status and timers on a port or trunk:
Click VLAN, Dynamic.
1.
Select Configure Interface from the Step list.
2.
Set the Interface type to display as Port or Trunk.
3.
Modify the GVRP status or timers for any interface.
4.
Click Apply.
5.
– 177 –
| VLAN Configuration
C 6
HAPTER
IEEE 802.1Q VLANs