Show Ip Source-Guard - Edge-Core ECS3510-26P Management Manual

| General Security Measures
C 24
HAPTER
IP Source Guard
show ip
source-guard
show ip
source-guard
binding
C U
OMMAND SAGE
◆ This command sets the maximum number of address entries that can
be mapped to an interface in the binding table, including both dynamic
entries discovered by DHCP snooping and static entries set by the
source-guard command.
E
XAMPLE
This example sets the maximum number of allowed entries in the binding
table for port 5 to one entry.
Console(config)#interface ethernet 1/5
Console(config-if)#ip source-guard max-binding 1
Console(config-if)#
This command shows whether source guard is enabled or disabled on each
interface.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ip source-guard
Interface Filter-type
--------- -----------
Eth 1/1 DISABLED
Eth 1/2 DISABLED
Eth 1/3 DISABLED
Eth 1/4 DISABLED
Eth 1/5 SIP
Eth 1/6 DISABLED
. .
.
This command shows the source guard binding table.
S
YNTAX
show ip source-guard binding [dhcp-snooping | static]
dhcp-snooping - Shows dynamic entries configured with DHCP
Snooping commands (see
static - Shows static entries configured with the
binding command (see
C M
OMMAND ODE
Privileged Exec
– 698 –
Max-binding
-----------
5
5
5
5
1
5
page 685)
page 694).
ip
ip source-guard