Cluster Commander - Edge-Core ECS3510-26P Management Manual

cluster commander

There can be up to 100 candidates and 36 member switches in one
◆
cluster.
A switch can only be a Member of one cluster.
◆
Configured switch clusters are maintained across power resets and
◆
network changes.
E
XAMPLE
Console(config)#cluster
Console(config)#
This command enables the switch as a cluster Commander. Use the no
form to disable the switch as cluster Commander.
S
YNTAX
[no] cluster commander
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Once a switch has been configured to be a cluster Commander, it
◆
automatically discovers other cluster-enabled switches in the network.
These "Candidate" switches only become cluster Members when
manually selected by the administrator through the management
station.
◆ Cluster Member switches can be managed through a Telnet connection
to the Commander. From the Commander CLI prompt, use the
rcommand id command to connect to the Member switch.
E
XAMPLE
Console(config)#cluster commander
Console(config)#
– 577 –
| System Management Commands
C 20
HAPTER
Switch Clustering