Cli Command Groups; Table 44: Command Group Index - Edge-Core ES3528MV2 Management Manual

CLI C G
OMMAND ROUPS
The system commands can be broken down into the functional groups
shown below
.

Table 44: Command Group Index

Command Group Description
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, the system clock, and switch clustering
Simple Network Activates authentication failure traps; configures
Management Protocol community access strings, and trap receivers
Remote Monitoring Supports statistics, history, alarm and event groups
Flow sampling Used with a remote sFlow Collector to provide an
accurate, detailed and real-time overview of the types
and levels of traffic present on the network
User Authentication Configures user names and passwords, command
privilege levels, logon access using local or remote
authentication, management access through the web
server, Telnet server and Secure Shell; as well as port
security, IEEE 802.1X port access control, restricted
access based on specified IP addresses, and PPPoE
Intermediate Agent
General Security Segregates traffic for clients attached to common data
Measures ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, or
next header), or non-IP frames (based on MAC address
or Ethernet type)
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
Congestion Control Sets the input/output rate limits, traffic storm thresholds,
and thresholds for broadcast and multicast storms which
can be used to trigger configured rate limits or to shut
down a port.
Loopback Detection Detects general loopback conditions caused by hardware
problems or faulty protocol settings
UniDirectional Link Detect and disables unidirectional links
Detection
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
Spanning Tree Configures Spanning Tree settings for the switch
– 689 –
| Using the Command Line Interface
C 18
HAPTER

CLI Command Groups

Page
691
699
773
795
803
809
873
951
975
1003
1017
1027
1047
1053
1059
1065