| Authentication Commands
C
23
HAPTER
802.1X Port Authentication
dot1x max-req
C
U
OMMAND
SAGE
For guest VLAN assignment to be successful, the VLAN must be configured
and set as active (see the
guest VLAN for the port (see the
E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x intrusion-action guest-vlan
Console(config-if)#
This command sets the maximum number of times the switch port will
retransmit an EAP request/identity packet to the client before it times out
the authentication session. Use the no form to restore the default.
S
YNTAX
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
D
EFAULT
2
C
M
OMMAND
ODE
Interface Configuration
E
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-req 2
Console(config-if)#
– 648 –
vlan database
command) and assigned as the
network-access guest-vlan
command).