Displaying Lldp Local Device Information; Figure 212: Showing The Civic Address For An Lldp Interface - Edge-Core ECS3510-26P Management Manual

26-port fast ethernet layer 2 switch

Hide thumbs Also See for ECS3510-26P:

Table of Contents

| Basic Administration Protocols

Link Layer Discovery Protocol

To show the physical location of the attached device:

Click Administration, LLDP.

Select Configure Interface from the Step list.

Select Show CA-Type from the Action list.

Select an interface from the Port or Trunk list.

Use the Administration > LLDP (Show Local Device Information) page to

display information about the switch, such as its MAC address, chassis ID,

management IP address, and port information.

"show lldp info local-device" on page 940

These parameters are displayed:

Global Settings

Chassis Type – Identifies the chassis containing the IEEE 802 LAN

entity associated with the transmitting LLDP agent. There are several

ways in which a chassis may be identified and a chassis ID subtype is

used to indicate the type of component being referenced by the chassis

Show Quick Links

Table of Contents