Ip Igmp Snooping - Edge-Core ECS3510-26P Management Manual

This command enables IGMP snooping globally on the switch or on a

ip igmp snooping

selected VLAN interface. Use the no form to disable it.
S
D
Disabled
C
Global Configuration
C
◆
◆
E
The following example enables IGMP snooping globally.
This command enables IGMP Snooping with Proxy Reporting. Use the no
ip igmp snooping
form to restore the default setting.
proxy-reporting
S
D
Global: Enabled
VLAN: Based on global setting
C
Global Configuration
YNTAX
[no] ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4093)
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
When IGMP snooping is enabled globally, the per VLAN interface
settings for IGMP snooping take precedence.
When IGMP snooping is disabled globally, snooping can still be
configured per VLAN interface, but the interface settings will not take
effect until snooping is re-enabled globally.
XAMPLE
Console(config)#ip igmp snooping
Console(config)#
YNTAX
[no] ip igmp snooping proxy-reporting
ip igmp snooping vlan vlan-id proxy-reporting {enable | disable}
no ip igmp snooping vlan vlan-id proxy-reporting
vlan-id - VLAN ID (Range: 1-4093)
enable - Enable on the specified VLAN.
disable - Disable on the specified VLAN.
S
EFAULT ETTING
M
OMMAND ODE
– 889 –
| Multicast Filtering Commands
C 36
HAPTER
IGMP Snooping