Snmp-Server Enable Port-Traps Atc Multicast-Alarm-Clear - Edge-Core ECS3510-26P Management Manual

| Automatic Traffic Control Commands
C 30
HAPTER
SNMP Trap Commands
snmp-server enable
port-traps atc
multicast-alarm-
clear
snmp-server enable
port-traps atc
multicast-alarm-fire
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc broadcast-control-
release
Console(config-if)#
R C
ELATED OMMANDS
auto-traffic-control alarm-clear-threshold (779)
auto-traffic-control action (778)
auto-traffic-control release-timer (776)
This command sends a trap when multicast traffic falls beneath the lower
threshold after a storm control response has been triggered. Use the no
form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc multicast-alarm-clear
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-alarm-clear
Console(config-if)#
R C
ELATED OMMANDS
auto-traffic-control action (778)
auto-traffic-control alarm-clear-threshold (779)
This command sends a trap when multicast traffic exceeds the upper
threshold for automatic storm control. Use the no form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc multicast-alarm-fire
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
– 784 –