| Quality of Service
C
11
HAPTER
Configuring a Class Map
To show the configured class maps:
Click Traffic, DiffServ.
1.
Select Configure Class from the Step list.
2.
Select Show from the Action list.
3.
Figure 125: Showing Class Maps
To edit the rules for a class map:
Click Traffic, DiffServ.
1.
Select Configure Class from the Step list.
2.
Select Add Rule from the Action list.
3.
Select the name of a class map.
4.
Specify type of traffic for this class based on an access list, a DSCP or
5.
IP Precedence value, or a VLAN. You can specify up to 16 items to
match when assigning ingress traffic to a class map.
Click Apply.
6.
Figure 126: Adding Rules to a Class Map
– 256 –