Table 81: Web Authentication; Web-Auth Login-Attempts - Edge-Core ECS3510-26P Management Manual

| General Security Measures
C 24
HAPTER
Web Authentication
web-auth
login-attempts
RADIUS authentication must be activated and configured for the web
N :
OTE
authentication feature to work properly (see
page 612).
Web authentication cannot be configured on trunk ports.
N :
OTE

Table 81: Web Authentication

Command

web-auth login-attempts

web-auth quiet-period
web-auth session-timeout
web-auth system-auth-
control
web-auth
web-auth re-authenticate
(Port)
web-auth re-authenticate (IP)
show web-auth
show web-auth interface
show web-auth summary
This command defines the limit for failed web authentication login
attempts. After the limit is reached, the switch refuses further login
attempts until the quiet time expires. Use the no form to restore the
default.
S
YNTAX
web-auth login-attempts count
no web-auth login-attempts
count - The limit of allowed failed login attempts. (Range: 1-3)
D S
EFAULT ETTING
3 login attempts
C M
OMMAND ODE
Global Configuration
– 680 –
"Authentication Sequence" on
Function
Defines the limit for failed web authentication login
attempts
Defines the amount of time to wait after the limit for
failed login attempts is exceeded.
Defines the amount of time a session remains valid
Enables web authentication globally for the switch
Enables web authentication for an interface
Ends all web authentication sessions on the port and
forces the users to re-authenticate
Ends the web authentication session associated with
the designated IP address and forces the user to re-
authenticate
Displays global web authentication parameters
Displays interface-specific web authentication
parameters and statistics
Displays a summary of web authentication port
parameters and statistics
Mode
GC
GC
GC
GC
IC
PE
PE
PE
PE
PE