Figure 296: Adding Multicast Groups To An Igmp Filtering Profile - Edge-Core ECS3510-26P Management Manual

To add a range of multicast groups to an IGMP filter profile:
Click Multicast, IGMP Snooping, Filter.
1.
Select Configure Profile from the Step list.
2.
Select Add Multicast Group Range from the Action list.
3.
Select the profile to configure, and add a multicast group address or
4.
range of addresses.
Click Apply.
5.

Figure 296: Adding Multicast Groups to an IGMP Filtering Profile

To show the multicast groups configured for an IGMP filter profile:
Click Multicast, IGMP Snooping, Filter.
1.
Select Configure Profile from the Step list.
2.
Select Show Multicast Group Range from the Action list.
3.
Select the profile for which to display this information.
4.
Figure 297: Showing the Groups Assigned to an IGMP Filtering Profile
– 491 –
| Multicast Filtering
C 17
HAPTER
Filtering and Throttling IGMP Groups