Edge-Core ECS3510-26P Management Manual page 942

| LLDP Commands
C 37
HAPTER
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Note that an IP phone or other end-node device which advertises LLDP-
MED capabilities must be connected to the switch for information to be
displayed in the "Device Class" field.
Console#show lldp info remote-device
LLDP Remote Devices Information
Interface Chassis ID
--------- ----------------- ----------------- ---------------------
Eth 1/1 00-1A-7E-AC-2B-12 00-1A-7E-AC-2B-13
Console#show lldp info remote-device detail ethernet 1/1
---------------------------------------------------------------
Local Port Name : Eth 1/1
Chassis Type : MAC Address
Chassis ID : 00-1A-7E-AC-2B-12
Port ID Type : MAC Address
Port ID : 00-1A-7E-AC-2B-13
System Name :
System Description :
Port Description : Ethernet Port on unit 1, port 1
SystemCapSupported : Bridge
SystemCapEnabled : Bridge
Remote Management Address :
192.168.1.20 (IPv4)
Remote Port VID : 1
Remote VLAN Name :
VLAN-1 : DefaultVlan
Remote Protocol Identity (Hex) :
88-CC
Remote Power via MDI :
Remote power class : PSE
Remote power MDI supported : Yes
Remote power MDI enabled : Yes
Remote power pair controllable : No
Remote power pairs : Spare
Remote power classification : Class1
Remote Link Aggregation :
Remote link aggregation capable : Yes
Remote link aggregation enable : No
Remote link aggregation port id : 0
Remote Max Frame Size : 1518
Console#
– 942 –
Port ID
ECS4110-28T Managed GE Switch
System Name