| Basic Management Tasks
C
4
HAPTER
Displaying CPU Utilization
D
CPU U
ISPLAYING
W
I
EB
NTERFACE
To configure parameters for the console port:
Click System, then Telnet.
1.
Specify the connection parameters as required.
2.
Click Apply
3.
Figure 18: Telnet Connection Settings
TILIZATION
Use the System > CPU Utilization page to display information on CPU
utilization.
CLI R
EFERENCES
"show process cpu" on page 528
◆
P
ARAMETERS
The following parameters are displayed:
Time Interval – The interval at which to update the displayed
◆
utilization rate. (Options: 1, 5, 10, 30, 60 seconds; Default: 1 second)
CPU Utilization – CPU utilization over specified interval.
◆
W
I
EB
NTERFACE
To display CPU utilization:
Click System, then CPU Utilization.
1.
Change the update interval if required. Note that the interval is
2.
changed as soon as a new setting is selected.
– 120 –