Figure 75: Assigning Interfaces To Protocol Vlans - Edge-Core ECS3510-26P Management Manual

| VLAN Configuration
C 6
HAPTER
Protocol VLANs
If the frame is untagged and the protocol type matches, the frame
■
is forwarded to the appropriate VLAN.
If the frame is untagged but the protocol type does not match, the
■
frame is forwarded to the default VLAN for this interface.
P
ARAMETERS
These parameters are displayed:
Interface – Displays a list of ports or trunks.
◆
Port – Port Identifier. (Range: 1-26)
◆
Trunk – Trunk Identifier. (Range: 1-12)
◆
Protocol Group ID – Protocol Group ID assigned to the Protocol VLAN
◆
Group. (Range: 1-2147483647)
VLAN ID – VLAN to which matching protocol traffic is forwarded.
◆
(Range: 1-4093)
W I
EB NTERFACE
To map a protocol group to a VLAN for a port or trunk:
Click VLAN, Protocol.
1.
Select Configure Interface from the Step list.
2.
Select Add from the Action list.
3.
Select a port or trunk.
4.
Enter the identifier for a protocol group.
5.
Enter the corresponding VLAN to which the protocol traffic will be
6.
forwarded.
Click Apply.
7.

Figure 75: Assigning Interfaces to Protocol VLANs

– 188 –