Ip Igmp Snooping Version - Edge-Core ECS3510-26P Management Manual

This command configures the IGMP snooping version. Use the no form to
ip igmp snooping
restore the default.
version
S
D
Global: IGMP Version 2
VLAN: Not configured, based on global setting
C
Global Configuration
C
◆
◆
E
The following configures the global setting for IGMP snooping to version 1.
This command discards any received IGMP messages (except for multicast
ip igmp snooping
protocol packets) which use a version different to that currently configured
version-exclusive
by the
feature.
S
YNTAX
ip igmp snooping [vlan vlan-id] version {1 | 2 | 3}
no ip igmp snooping version
vlan-id - VLAN ID (Range: 1-4093)
1 - IGMP Version 1
2 - IGMP Version 2
3 - IGMP Version 3
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
This command configures the IGMP report/query version used by IGMP
snooping. Versions 1 - 3 are all supported, and versions 2 and 3 are
backward compatible, so the switch can operate with other devices,
regardless of the snooping version employed.
If the IGMP snooping version is configured on a VLAN, this setting takes
precedence over the global configuration.
XAMPLE
Console(config)#ip igmp snooping version 1
Console(config)#

ip igmp snooping version

YNTAX
ip igmp snooping [vlan vlan-id] version-exclusive
no ip igmp snooping version-exclusive
vlan-id - VLAN ID (Range: 1-4093)
– 895 –
| Multicast Filtering Commands
C 36
HAPTER
command. Use the no form to disable this
IGMP Snooping