Show Subnet-Vlan - Edge-Core ECS3510-26P Management Manual

26-port fast ethernet layer 2 switch
Hide thumbs Also See for ECS3510-26P:
Table of Contents

Advertisement

E
The following example assigns traffic for the subnet 192.168.12.192, mask
255.255.255.224, to VLAN 4.
This command displays IP Subnet VLAN assignments.

show subnet-vlan

C
Privileged Exec
C
E
The following example displays all configured IP subnet-based VLANs.
is found, the corresponding VLAN ID is assigned to the frame. If no
mapping is found, the PVID of the receiving port is assigned to the
frame.
The IP subnet cannot be a broadcast or multicast IP address.
When MAC-based, IP subnet-based, and protocol-based VLANs are
supported concurrently, priority is applied in this sequence, and then
port-based VLANs last.
XAMPLE
Console(config)#subnet-vlan subnet 192.168.12.192 255.255.255.224 vlan 4
Console(config)#
M
OMMAND
ODE
U
OMMAND
SAGE
Use this command to display subnet-to-VLAN mappings.
The last matched entry is used if more than one entry can be matched.
XAMPLE
Console#show subnet-vlan
IP Address
Mask
---------------
---------------
192.168.12.0
255.255.255.128
192.168.12.128
255.255.255.192
192.168.12.192
255.255.255.224
192.168.12.224
255.255.255.240
192.168.12.240
255.255.255.248
192.168.12.248
255.255.255.252
192.168.12.252
255.255.255.254
192.168.12.254
255.255.255.255
192.168.12.255
255.255.255.255
Console#
– 847 –
C
33
HAPTER
Configuring IP Subnet VLANs
VLAN ID
Priority
-------
--------
1
0
3
0
4
0
5
0
6
0
7
0
8
0
9
0
10
0
| VLAN Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents