Edge-Core ECS3510-26P Management Manual page 103

P
ARAMETERS
The following parameters are displayed:
Copy Type – The firmware copy operation includes these options:
◆
FTP Upgrade – Copies a file from an FTP server to the switch.
■
FTP Download – Copies a file from the switch to an FTP server.
■
HTTP Upgrade – Copies a file from a management station to the
■
switch.
HTTP Download – Copies a file from the switch to a management
■
station
TFTP Upgrade – Copies a file from a TFTP server to the switch.
■
TFTP Download – Copies a file from the switch to a TFTP server.
■
FTP/TFTP Server IP Address – The IP address of an FTP/TFTP server.
◆
User Name – The user name for FTP server access.
◆
Password – The password for FTP server access.
◆
File Type – Specify Operation Code or Loader.
◆
File Name – The file name should not contain slashes (\ or /), the
◆
leading letter of the file name should not be a period (.), and the
maximum length for file names is 32 characters for files on the switch
or 128 characters for files on the server. (Valid characters: A-Z, a-z,
0-9, ".", "-", "_")
Auto reboot after opcode upgrade completed. – Automatically
◆
reboots the switch after the operation code has been upgraded.
Up to two copies of the system software (i.e., the runtime firmware)
N :
OTE
can be stored in the file directory on the switch.
The maximum number of user-defined configuration files is limited
N :
OTE
only by available flash memory space.
The file
N : "Factory_Default_Config.cfg"
OTE
or management station, but cannot be used as the destination file name on
the switch.
W I
EB NTERFACE
To copy firmware files:
Click System, then File.
1.
Select Copy from the Action list.
2.
Select FTP Upgrade, HTTP Upgrade, or TFTP Upgrade as the file transfer
3.
method.
– 103 –
| Basic Management Tasks
C 4
HAPTER
Managing System Files
can be copied to a TFTP server