Lldp Med-Notification - Edge-Core ECS3510-26P Management Manual

Console(config-if)#lldp med-location civic-addr 18 Avenue
Console(config-if)#lldp med-location civic-addr 19 320
Console(config-if)#lldp med-location civic-addr 27 5
Console(config-if)#lldp med-location civic-addr 28 509B
Console(config-if)#lldp med-location civic-addr country US
Console(config-if)#lldp med-location civic-addr what 2
Console(config-if)#
This command enables the transmission of SNMP trap notifications about
lldp
LLDP-MED changes. Use the no form to disable LLDP-MED notifications.
med-notification
S
YNTAX
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
◆
◆
◆
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-notification
Console(config-if)#
[no] lldp med-notification
S
ETTING
M
ODE
U
SAGE
This option sends out SNMP trap notifications to designated target
stations at the interval specified by the
command. Trap notifications include information about state changes in
the LLDP MIB (IEEE 802.1AB), the LLDP-MED MIB (ANSI/TIA 1057), or
organization-specific LLDP-EXT-DOT1 and LLDP-EXT-DOT3 MIBs.
SNMP trap destinations are defined using the
command.
Information about additional changes in LLDP neighbors that occur
between SNMP notifications is not transmitted. Only state changes that
exist at the time of a trap notification are included in the transmission.
An SNMP agent should therefore periodically check the value of
lldpStatsRemTableLastChangeTime to detect any lldpRemTablesChange
notification-events missed due to throttling or transmission loss.
– 935 –
| LLDP Commands
C 37
HAPTER
lldp notification-interval
snmp-server host