Clock Timezone-Predefined - Edge-Core ECS3510-26P Management Manual

| System Management Commands
C 20
HAPTER
Time
clock timezone-
predefined
corresponding to your local time, you must indicate the number of hours
and minutes your time zone is east (before) or west (after) of UTC.
E
XAMPLE
Console(config)#clock timezone Japan hours 8 minute 0 after-UTC
Console(config)#
R C
ELATED OMMANDS
show sntp (567)
This command uses predefined time zone configurations to set the time
zone for the switch's internal clock. Use the no form to restore the default.
S
YNTAX
clock timezone-predefined offset-city
no clock timezone-predefined
offset - Select the offset from GMT. (Range: GMT-0100 - GMT-1200;
GMT-Greenwich-Mean-Time; GMT+0100 - GMT+1300)
city - Select the city associated with the chosen GMT offset. After
the offset has been entered, use the tab-complete function to
display the available city options.
D S
EFAULT ETTING
GMT-Greenwich-Mean-Time-Dublin,Edinburgh,Lisbon,London
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
This command sets the local time zone relative to the Coordinated
Universal Time (UTC, formerly Greenwich Mean Time or GMT), based on
the earth's prime meridian, zero degrees longitude. To display a time
corresponding to your local time, you must indicate the number of hours
and minutes your time zone is east (before) or west (after) of UTC.
E
XAMPLE
Console(config)#clock timezone-predefined GMT-0930-Taiohae
Console(config)#
R C
ELATED OMMANDS
show sntp (567)
– 570 –