Table 95: Show Lacp Counters - Display Description; Trunk Status Display Commands - Edge-Core ECS3510-26P Management Manual

| Link Aggregation Commands
C 27
HAPTER

Trunk Status Display Commands

Trunk Status Display Commands
show lacp
This command displays LACP information.
S
YNTAX
show lacp [port-channel] {counters | internal | neighbors |
sys-id}
port-channel - Local identifier for a link aggregation group.
(Range: 1-12)
counters - Statistics for LACP protocol messages.
internal - Configuration settings and operational state for local
side.
neighbors - Configuration settings and operational state for
remote side.
sys-id - Summary of system priority and MAC address for all
channel groups.
D S
EFAULT ETTING
Port Channel: all
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show lacp 1 counters
Port Channel: 1
-------------------------------------------------------------------------
Eth 1/ 2
-------------------------------------------------------------------------
LACPDUs Sent
LACPDUs Received
Marker Sent
Marker Received
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
. .
.

Table 95: show lacp counters - display description

Field Description
LACPDUs Sent Number of valid LACPDUs transmitted from this channel group.
LACPDUs Received Number of valid LACPDUs received on this channel group.
Marker Sent Number of valid Marker PDUs transmitted from this channel group.
Marker Received Number of valid Marker PDUs received by this channel group.
– 756 –
: 12
: 6
: 0
: 0