Hostname; System Status; Table 44: System Status Commands - Edge-Core ECS3510-26P Management Manual

| System Management Commands
C 20
HAPTER

System Status

hostname

S S
YSTEM TATUS
This command specifies or modifies the host name for this device. Use the
no form to restore the default host name.
S
YNTAX
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#hostname RD#1
Console(config)#
This section describes commands used to display system information.

Table 44: System Status Commands

Command Function
show access-list tcam- Shows utilization parameters for TCAM
utilization
show memory Shows memory utilization parameters
show process cpu Shows CPU utilization parameters
show running-config Displays the configuration data currently in use
show startup-config Displays the contents of the configuration file (stored
in flash memory) that is used to start up the system
show system Displays system information
show tech-support Displays a detailed list of system settings designed to
help technical support resolve configuration or
functional problems
show users Shows all active console and Telnet sessions, including
user name, idle time, and IP address of Telnet clients
show version Displays version information for the system
– 526 –
Mode
PE
NE, PE
NE, PE
PE
PE
NE, PE
PE
NE, PE
NE, PE