Main Menu; Table 6: Switch Main Menu - Edge-Core ECS3510-26P Management Manual

| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
M M
AIN ENU

Table 6: Switch Main Menu

Menu
System
General
Switch
IP
Capability
File
Copy
Set Startup
Show
Automatic Operation Code Upgrade
Time
Configure General
Manual
SNTP
Configure Time Server
Configure Time Zone
Configure Summer Time
Console
Telnet
CPU Utilization
Memory Status
Reload
Interface
Port
General
Configure by Port List
Configure by Port Range
Show Information
Mirror
Add
Show
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions. The
following table briefly describes the selections available from this program.
Description
Provides basic system description, including contact information
Shows the number of ports, hardware version, power status, and
firmware version numbers
Sets the IPv4 address for management access
Enables support for jumbo frames;
shows the bridge extension parameters
Allows the transfer and copying files
Sets the startup file
Shows the files stored in flash memory; allows deletion of files
Automatically upgrades operation code if a newer version is
found on the server
Manually sets the current time
Configures SNTP polling interval
Configures a list of SNTP servers
Sets the local time zone for the system clock
Configures summer time settings
Sets console port connection parameters
Sets Telnet connection parameters
Displays information on CPU utilization
Shows memory utilization parameters
Restarts the switch immediately, at a specified time, after a
specified delay, or at a periodic interval
Configures connection settings per port
Configures connection settings for a range of ports
Displays port connection status
Sets the source and target ports for mirroring
Shows the configured mirror sessions
– 84 –
Page
97
98
443
100,
101
102
102
105
106
107
111
111
112
113
114
115
117
119
120
121
122
127
127
127
130
131
132
132
132