Tacacs+ Client; Tacacs-Server Host; Table 68: Tacacs+ Client Commands - Edge-Core ECS3510-26P Management Manual

| Authentication Commands
C 23
HAPTER

TACACS+ Client

TACACS+ C
LIENT

tacacs-server host

Retransmit Times
Request Timeout
Key
Server 1:
Server IP Address
Authentication Port Number : 1812
Accounting Port Number
Retransmit Times
Request Timeout
Key
Radius Server Group:
Group Name
------------------------- -------------
radius
Console#
Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to
control access to TACACS-aware devices on the network. An authentication
server contains a database of multiple user name/password pairs with
associated privilege levels for each user or group that require management
access to a switch.

Table 68: TACACS+ Client Commands

Command Function
tacacs-server host Specifies the TACACS+ server and optional
parameters
tacacs-server key Sets the TACACS+ encryption key
tacacs-server port Specifies the TACACS+ server network port
show tacacs-server Shows the current TACACS+ settings
This command specifies the TACACS+ server and other optional
parameters. Use the no form to remove the server, or to restore the
default values.
S
YNTAX
tacacs-server index host host-ip-address [key key]
[port port-number] [retransmit retransmit] [timeout timeout]
no tacacs-server index
index - The index for this server. (Range: 1)
host-ip-address - IP address of a TACACS+ server.
key - Encryption key used to authenticate logon access for the
client. Do not use blank spaces in the string. (Maximum length: 48
characters)
– 618 –
: 2
: 5
:
: 192.168.1.1
: 1813
: 2
: 5
: *
Member Index
1
Mode
GC
GC
GC
GC