Figure 101: Creating An Mst Instance - Edge-Core ECS3510-26P Management Manual

W I
EB NTERFACE
To create instances for MSTP:
Click Spanning Tree, MSTP.
1.
Select Configure Global from the Step list.
2.
Select Add from the Action list.
3.
Specify the MST instance identifier and the initial VLAN member.
4.
Additional member can be added using the Spanning Tree > MSTP
(Configure Global - Add Member) page. If the priority is not specified,
the default value 32768 is used.
Click Apply.
5.

Figure 101: Creating an MST Instance

To show the MSTP instances:
Click Spanning Tree, MSTP.
1.
Select Configure Global from the Step list.
2.
Select Show Information from the Action list.
3.
Select an MST ID. The attributes displayed on this page are described
4.
under "Displaying Global Settings for STA" on page
Figure 102: Displaying Global Settings for an MST Instance
– 221 –
| Spanning Tree Algorithm
C 8
HAPTER
Configuring Multiple Spanning Trees
212.