Error Codes - Datalogic Magellan 3500HSi Quick Reference Manual

Error Codes

If an error is detected, the scanner will sound a long low tone (for three
seconds) and flash its LED, indicating a failure. When this occurs, press
the Scanner button to hear the error code. If it is configured to do so, the
scanner will sound a series of beeps corresponding to the error code and/
or flash its LED simultaneous to the beeps.
NUMBER OF
LED FLASHES/
BEEPS
1
2
6
10
11
13
Quick Reference Guide
ERROR
Configuration
Host Interface
Main PCB
Button Error
USB Device
CPLD ID
CORRECTIVE ACTION
Contact Helpdesk for
assistance
9