Table of Contents
Advertisement
PROBLEM
If the scanner still does not function properly, consult the Product Reference
Guide (PRG) or contact your local supplier or Datalogic Customer Support
Services.
a. Reading of the various bar code symbologies can be independently enabled
or disabled in the scanner.
ERROR CODES
If an error is detected, the scanner will sound a long low tone (for three
seconds) and flash its LED, indicating a failure. When this occurs, press
the Scanner button to hear the error code. If it is configured to do so,
the scanner will sound a series of beeps corresponding to the error code
and/or flash its LED simultaneous to the beeps. The table below
describes what these codes mean and what action should be taken for
each.
NUMBER OF LED
FLASHES/BEEPS
1
2
6
10
11
13
ERROR
Configuration
Host Interface
Main PCB
Button Error
USB Device
CPLD ID
SOLUTION
CORRECTIVE ACTION
Contact Helpdesk for assis-
tance
QUICK REFERENCE GUIDE
15
Hide quick links:
Advertisement
Table of Contents
